| Type: | Piezoresistive Pressure Sensor |
|---|---|
| Component: | SemiConductor Type |
| For: | Diffused Silicon Pressure Transmitter |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier PC11-BQ Fully Welded Pressure Sensor
Product overview
The PC11-BQ pressure sensor has provided customers with four designs, and it has successfully provided over a hundred customers with such a solution: welding the pressure core body and interface pressure head together, fundamentally eliminating the problem of "O" ring sealing leakage. It has high reliability, and is compact in size, making it the best choice for making highly reliable and high-quality pressure and liquid level transmitters. In order to provide a clearer description of this model of product, the information clearly defines which designs cannot be changed and which personalized designs are made by customers based on their actual needs. By integrating the advantages of Wotian with the needs of your company, a perfect product is formed.
Feature
Focusing on customer customization
High reliability pressure chip
Fully welded with joints, small-sized structure
High performance and reliability
Wide temperature compensation
Gauge pressure, absolute pressure, sealing pressure
Optional constant current and constant voltage excitation
18 months warranty period
Applications
Supporting pressure transmitter manufacturers
Supporting liquid level transmitter manufacturers
Fire protection and medical oxygen pressure matching
Combustible gas detection
Industry
Pressure control equipment
Hydraulic equipment
Liquid level control equipment
Gas equipment
Low temperature equipment
| Electrical performance parameters | |
| Range range and pressure mode |
BQ1 model: -100~0~10kPa... 25MPa (gauge pressure, absolute pressure, sealing pressure). BQ2 model: -100~0~10kPa... 25MPa (gauge pressure, absolute pressure, sealing pressure). BQ3 model: 0-10kPa... 100kPa (gauge pressure). BQ4 model: -100~0~100kPa... 25MPa (gauge pressure, absolute pressure, sealing pressure). |
| Incentive | The recommended constant current compensation is 1.5mA; 10V recommended for constant voltage compensation; Both constant current and constant voltage excitation without compensation are acceptable. |
| Impedance | Constant current: 2k Ω~5k Ω; Constant voltage: 3k Ω~18k Ω. |
| Electrical connections | Gold-plated Kovar pins or silicone flexible wires |
| Compensation temperature | 0 ºC~60 ºC (range ≤ 70kPa)- 10 ºC~70 ºC (other ranges). |
| Operation temperature | -40ºC~120ºC |
| Storage temperature | -40ºC~120ºC |
| Insulation resistance | ≥200MΩ/250VDC |
| Response time | ≤ 1ms (rising to 90% FS) |
| Measurement medium | All liquids and gases compatible with 316L |
| Mechanical vibration | 20g(20~5000HZ) |
| Impact | 100g(10ms) |
| Durability | 1×106(cycles) |
| Structural performance parameters | |
| Diaphragm material | 316L |
| Material of inlet head | SS304SS316L |
| Infusion of liquid | silicone oil |
| Basic parameters | ||||||
| Project | Condition | Minimum | Typical | Maximum | Unit | Notes |
| Nonlinear | Other ranges 25MPa |
-0.3 -0.4 |
±0.2 | 0.3 0.4 |
%FS | Note |
| Hysteresis | -0.05 | ±0.03 | 0.05 | %FS | ||
| Repeatability | -0.05 | ±0.03 | 0.05 | %FS | ||
| Zero point output signal | -2 | ±1 | 2 | mV | ||
| Full range output signal | 10kPa Other ranges 10kPa |
30 60 30 98 |
45 90 45 100 |
80 150 80 102 |
mV mV mV mV |
Motivation: 1.5mA 1.5mA 10V 10V |
| Zero temperature drift | 10kPa Other ranges |
-2 -1.5 |
±1.5 ±0.75 |
2 1.5 |
%FS | Note |
| Sensitivity temperature drift | -1.5 | ±0.75 | 1.5 | %FS | Note | |
| Thermal hysteresis | -0.075 | ±0.05 | 0.075 | %FS | Note | |
| Long term stability | -0.3 | ±0.2 | 0.3 | %FS/Year | ||
| Structure and dimensions |
PC11-BQ1 model Recommended use: M20 × 1.5, G1/2, NPT1/2, G1/4, NPT1/4, front threads can be customized according to customer actual needs. |
PC11-BQ2 model Recommended use: M20 × 1.5, G1/2, NPT1/2, G1/4, NPT1/4, front threads can be customized according to customer actual needs. |
| PC11-BQ3 model Customizable front threads according to customer actual needs |
PC11-BQ4 modelCustomizable front threads according to customer actual needs |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}