Manufacturer High-Frequency Radar Level Meter Level Transmitter for Corrosive Liquids PCM112

• Structure Design: Flange Type
• Pressure Range: Nature Pressure
• Display Type: LCD
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: PCM112
• IP Rating: IP67
• Certification: CE
• Customized: Customized
• Pressure Ranges: 0.1-150m
• Nominal Pressure: -0.1-2.5 MPa
• Output: Two Wire 4-20mA Transmission Output/Four Wire 4-20
• Communication Output: Hart / RS485 Modbus
• Microwave Frequency: 80GHz
• Transport Package: Carton
• Trademark: WTsensor
• Origin: China
• Production Capacity: 1000 Pieces
• Package Size: 10.00cm * 15.00cm * 15.00cm
• Package Gross Weight: 3.000kg

Product Description

Product Description

 

Product Overview:

The radar level meter antenna emits extremely narrow microwave pulses (80GHz), which propagate at the speed of light in space. When it encounters the surface of the measured medium, some of its energy is reflected back and received by the same antenna. The time interval between transmitting and receiving pulses is proportional to the distance from the antenna to the surface of the measured medium. Due to the extremely high propagation speed of electromagnetic waves, it is difficult to confirm the time interval between the transmitting and receiving masons (in the nanosecond range). The high-frequency radar level meter uses a special demodulation technology to accurately identify the time interval between the transmitting and receiving masons, thereby further calculating the distance from the antenna to the surface of the measured object.

Principle:

The radar level antenna emits narrow microwave pulses, which are transmitted downwards through the antenna. After the microwave comes into contact with the surface of the tested medium, it is reflected back and then received by the antenna system. The signal is transmitted to the electronic circuit and automatically converted into a level signal (because the microwave propagation speed is extremely fast, the electromagnetic wave reaches the target and is reflected back to the receiver, which takes almost an instant)The reference surface for measurement is the bottom surface of the thread or the sealing surface of the flange.

Features

Almost free from corrosion and foam; Almost unaffected by changes in water vapor, temperature, and pressure in the atmosphere.

In remote target detection and strong smoke and dust environments, it can detect smaller targets than microwave radar and achieve more accurate positioning, with higher resolution and stronger confidentiality.

The small beam angle and concentrated energy enhance the echo capability while also helping to avoid interference.

The measurement blind spot is smaller, and good results can also be achieved for small tank measurements.

Using millimeter wave bands with higher frequencies than Ku band radar, resulting in high accuracy.

The extremely narrow beam and penetration ability make it more adaptable to ultra complex working conditions without compromising measurement performance.

Applications
Chemical industry
Water level detection
Coal silos, ash silos, oil tanks, cement powder tanks, etc
Water storage tanks, acid-base storage tanks, slurry storage tanks, solid particles
 

Product Parameters

 

Parameters
Pressure ranges	0.1~150m
Nominal pressure	(-0.1~2.5)MPa
Output	Two wire 4-20mA transmission output/Four wire 4-20mA transmission output/Six wire 4-20mA transmission output
Communication output	HART / RS485 Modbus
Process temp.	(-40~200)ºC  Max(260~300)ºC
Microwave frequency	80GHz
Antenna size	32mm lens antenna/44mm lens antenna/76mm lens antenna
Emission angle	8°/ 6°/ 3°
local display	Display, buttons/upper computer debugging/Hart handheld programmer
Power Supply	Two wire system (DC24V)/Four wire system (AC220V)/Six wire system (DC12-24V)
Housing	Cast aluminum/stainless steel/plastic
Process Connection	Thread/flange (optional)
Application	Measurement of liquid and solid powders under complex process conditions
Medium	Liquids, solid powders, corrosive liquids, vapors, volatile liquids, strong dust, Occasions prone to crystallization and condensation
Operating Temp.	-20~70 ºC  Note:The instrument can work normally at (-40~-20) ºC, but the screen will display abnormalities
Storage Temp.	(-40~80)ºC
Relative humidity	<95%
Tank pressure	Max.2.5MPa
shock-proof	Mechanical vibration 10m/s ², (10-150) Hz
Explosion Grade	Exd IIC T6 Gb / EXia llC T6 Ga

External structure

Type	Structure diagram	Applicable media and applications
Type 1		Applicable medium: liquid Application: Suitable for measuring most liquid products, sanitary products, pharmaceuticals, and chemical raw materials
Type 2		Applicable medium: solid Application: Solid and solid powders such as material piles

About Us:

 

 

 

Certifications

 

 

For more question→