PC12III High Reliability Flush Diaphragm Pressure Sensor with Thread

• Customization: Available
• Type: Resonant Pressure Sensor
• Component: SemiConductor Type
• Model NO.: PC12III
• For: Diffused Silicon Pressure Transmitter
• Output Signal Type: Analog Type
• Production Process: Normal Wirewound
• Material: Stainless Steel
• Certification: CE
• Customized: Customized
• Pressure Range: 0~35kpa……10MPa
• Pressure Reference: Gauge/Absolute/Sealed Gauge Pressure
• Excitation: 1.5mA
• Input Impedance: 2KΩ~5KΩ
• Electrical Connection: Silicon Soft Wire
• Compensation Temp.: 0ºC~60ºC(≤70kpa)
• Operating Temp.: -40ºC~125ºC
• Storage Temp.: -40ºC~125ºC
• Insulation Resistance: ≥200mΩ/250VDC
• Response Time: ≤1ms
• Transport Package: Carton
• Trademark: WTsensor
• Origin: China
• Production Capacity: 1000 Pieces

Product Description

PC12III  Flush Diaphragm Pressure Sensor with Thread

Features
Flush diaphragm pressure sensor with thread structure.
Imported highly reliable pressure die
Compensation board filled with glue for protection against moisture
All stainless steel housing material
High accuracy, high reliability
Strong anti-interference, good long-term stability
12 months warranty period


Applications
Glue
Environmental protection, chemical, coating
Polyurethane equipment
Industry standards supporting

Product overview         
The PC12III OEM products adopt a one-time oil filling technology. The diaphragm directly contacts the measuring medium, and the pressure is transmitted to the pressure chip through silicon oil to generate an electrical signal. The compensation circuit will modify the pressure signal to a linear pressure signal.  
Thread end face stress diaphragm exposed directly feel the pressure, using open corrugated structure, resistant to touch, external pressure through stainless steel diaphragm, internal seal of the medium oil transmitted to the sensitive chip. The sensitive chip does not directly contact the measured medium, forming an all-solid structure for pressure measurement, so the product can be used in various occasions, including harsh corrosive medium environment.
 

Electrical performance parameters
Pressure range	0~35kPa...10MPa
Pressure reference	Gauge pressure, Absolute pressure, Sealed gauge pressure
Excitation	1.5mA recommended for constant current; 10V for constant voltage.
Input impedance	Constant current: 2kΩ~5kΩ;  constant voltage: 5kΩ~18kΩ
Electrical connection	Silicon soft wire
Compensation temp.	0ºC~60ºC(≤70kPa); -10ºC~70ºC(other ranges)
Operating temp.	-40ºC~125ºC
Storage temp.	-40ºC~125ºC
Insulation resistance	≥200MΩ/250VDC
Response time	≤1ms (up to 90%FS)
Measured medium	All the liquids and gases compatible with 316L.
Mechanical vibration	20g (20~5000Hz)
Durability	10^6Pressure cycles

 

Structural performance parameters
Diaphragm material	316L
Housing material	316L
Oil filling	Silicon oil

 

Basic parameters
Item	Min	Nominal	Max	Unit	Note
Non-linearity	-0.3	±0.25	0.3	%FS	Note1
Hysteresis	-0.05	±0.03	0.05	%FS
Repeatability	-0.05	±0.03	0.05	%FS
Zero output	-2	±1	2	mV
Span output	60	90	150	mV	1.5mA supply
Zero temp. coefficient	-1.5	±1.2	1.5	%FS	Note(2)
Span temp. coefficient	-1.5	±1.2	1.5	%FS	Note(2)
Thermal hysteresis	-0.075	±0.05	0.075	%FS	Note(3)
Long term stability	-0.3	±0.2	0.3	%FS/year

 

Thermal hysteresis	-0.075	±0.05	0.075	%FS	Note(3)
Long term stability	-0.3	±0.2	0.3	%FS/year

Note:
(1) Calculate according to BFSL least square method.
(2) In the compensation temperature range, refer to  -10 ºC ~ 70 ºC, and refer to 30 ºC .
(3)After passing high and low temperature, return to the reference temperature.
 

Structure & dimension

Pressure range selection
Code	Pressure reference	Pressure range	Overpressure	Burst pressure
35k	G	0~35kPa	300%FS	500%FS
100k	G,A	0~100kPa	200%FS	500%FS
250k	G	0~250kPa	200%FS	500%FS
600k	G	0~600kPa	200%FS	500%FS
1M	G	0~1MPa	200%FS	500%FS
1.6M	G,S	0~1.6MPa	200%FS	500%FS
2.5M	G,S	0~2.5MPa	200%FS	500%FS
6M	S	0~6MPa	200%FS	400%FS
10M	S	0~10MPa	200%FS	≤25MPa

Note: G: Gauge pressure, A: Absolute pressure, S: Sealed gauge pressure
 

How to order

About Us:







Certifications:


FAQ:
1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on pressure sensor for 33 years.
2.    Q: What international certificates do you have?
        A: ISO9001, CE, RoHS Certificated.
3.    Q: What is your production capacity?
        A: We produced 1500000 pieces pressure sensor in year 2017.
4.    Q: What is the lead time of your product?
        A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization. 
       Note: lead time may vary base on different products. Please contact us for detailed lead time. 
5.    Q: What is the warranty of your products?
       A: Our warranty time is 18 months after shipment.
6.    Q: Do you provide customized products?
       A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.