| Type: | Piezoresistive Pressure Sensor |
|---|---|
| Component: | SemiConductor Type |
| For: | Diffused Silicon Pressure Transmitter |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
PC90M Multivariable Differential Pressure Sensor
The PC90M multivariable differential pressure sensor is a differential pressure sensor with overload pressure protection. The differential pressure-sensitive core uses an imported high-stability single-crystal silicon differential chip from Germany. It is packaged using a fully welded sealed structure and is filled with silicone oil under high vacuum. Measurement diaphragms of different materials not only isolate the measured medium and the differential pressure chip but also enable the sensor to reliably measure the pressure difference signal of various strongly corrosive media over a long period. The differential pressure sensor can convert the measured pressure difference signal into a millivolt signal linearly proportional to it through external excitation.
Features
Optional imported high stability monocrystalline silicon differential pressure die
High precision and good stability
Static pressure error within ± 0.1% FS/10MPa
Patented Dual Overload Protection Diaphragm Design
Unidirectional overvoltage limit can reach 40MPa
Constant stress excitation
316L stainless steel fully welded integrated structure
Positive and negative pressure symmetry, no O-ring inside
Small splint structure
Application
Core components of differential pressure transmitter
Core components of differential pressure flow transmitter
| Performance parameters | |
| Power supply | 5V DC |
| Operation temperature | -40~85ºC |
| Storage temperature | -50~125ºC |
| Output signal voltage | 60~140mV |
| Zero temperature drift | ±0.05%FS/ºC |
| Temperature hysteresis | ±0.1%FS(10kPa<range≤1000kPa) |
| ±0.5%FS(range≤10kPa) | |
| Pressure hysteresis | ±0.025%FS |
| Long-term Drift | ±0.05%FS/year |
| Nonlinear | ±0.5%FS(10kPa<range≤1000kPa) |
| ±1.5%FS(range≤10kPa) | |
| Static pressure effect | ±0.15%FS/10MPa |
| Diaphragm material | 316L |
| External dimensions | |
| Thread code | Dimensions unit:mm |
| H2: M27×2 |
|
| H9: M45×1.5 |
|
| H10: M56×1.5 |
|
| H11: 55-16 American standard thread |
H=38.9(6kPa),39(40kPa),39.1(100kPa),39.3(250kPa),39.6(1MPa), 39.8(3MPa) |
| Range selection for differential pressure monocrystalline silicon die | ||||
| Range code | Pressure type | Range | Single-end overload | Static pressure |
| 6k | D | -6kPa~0~6kPa | 16MPa | 16MPa |
| 40k | D | -40kPa~0~40kPa | 16MPa | 16MPa |
| 100k | D | -100kPa~0~100kPa | 16MPa | 25MPa |
| 250k | D | -250kPa~0~250kPa | 16MPa | 25MPa |
| 1M | D | -1MPa~0~1MPa | 16MPa | 40MPa |
| 3M | D | -3MPa~0~3MPa | 16MPa | 40MPa |
| Range selection for pressure industrial grade die | ||||
| Range code | Pressure type | Range | Overload pressure | Burst pressure |
| 6M | S | 0~6MPa | 200%FS | 400%FS |
| 16M | S | 0~16MPa | 200%FS | 400%FS |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}