DS830 precision dicing machine uses the DS-300 software control system, imported high-resolution lens and camera to enhance graphics alignment accuracy and efficiency. DS830 is applicable to the cutting process of silicon, PCB, ceramic, glass, lithium niobate, alumina and quartz.
Features
- Graphical and simulative display of cutting process
- Water and gas curtain employed to reduce cutting powder residue
- Multi-angle water spray
- Broken Blade Detector (BBD) option
Specifications
|
Configuration and performance |
Workpiece size |
Φ200mm | 180mm (for square) |
Groove depth |
≤4mm or customize |
Table flatness |
±0.005mm/150mm |
Alignment system |
80x straight light + ring light (40x 210x optional) |
Spindle |
Revolution speed range |
10000~50000 rpm |
Output power |
1.5kW(2.2kW optional) |
X axis |
Drive mode |
Servo motor |
Max. stroke |
380mm |
Stroke resolution |
0.001mm |
Feed speed range |
0.1~400mm/s |
Y axis |
Drive mode |
Step motor + grating closed-loop control system |
Max. stroke |
210mm |
Stroke resolution |
0.0005mm |
Single-step positioning accuracy |
≤0.003mm/5mm |
Index positioning accuracy |
≤0.005mm/210mm |
Z axis |
Drive mode |
Step motor |
Max. stroke |
30mm |
Stroke resolution |
0.001mm |
Repeatability accuracy |
0.002mm |
Θ axis |
Drive mode |
DD motor |
Max. rotating angle |
380° |
Angle resolution |
0.0002° |
Basic specification |
Power supply |
Single phase, AC220V±10% |
Power consumption |
0.9kW (processing) |
0.8kW (warming up) |
Compressed air |
Pressure: 0.55~0.8Mpa; average flow rate: 350L/min |
Cleaning water |
Pressure: 0.2~0.4Mpa; flow rate 3.0L/min |
Cooling water |
Pressure: 0.2~0.4Mpa; flow rate 1.5L/min |
Exhaust air rate |
1.8m3/min (ANR) |
Overall dimensions W×D×H |
775mm×960mm×1650 mm |
Weight |
600kg |
• Use clean, oil-free air (dew point below -15, residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
• Keep room temperature fluctuations within ±1ºC of the set value (Set value should be between 20ºC - 25ºC), indoor humidity no more than 80% and no condensation.
• Keep cutting water and cleaning water 2ºC above room temperature (fluctuations within ±1ºC). Keep temperature of cooling water the same as room temperature.
• The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
• This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
• Please follow the product manual of our company.
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.