X19(WTG19) Industrial Pressure Sensor
Piezoresistive silicon chip employed
Perfect long term stability
MEMS technology
Cost effective
X19 OEM Pressure Sensor is a standard and economic pressure sensor applied in clean air pressure measurement. A high sensitivity piezoresistive silicon pressure chip is employed in the transducer. Without oil filling, this kind of sensor has a very good temperature performance. The air measured should be no-aggressive, as air will contact pressure chip directly.
Pressure range
|
| Pressure range |
250Pa, 1kPa, 2kPa, 4kPa, 6kPa, 8kPa, 10kPa(bar and psi unit available) |
| Pressure reference |
Gauge pressure |
| Overpressure |
300%F.S. |
Output signal
|
| Zero output |
±2mV |
| Span output |
≥30mV(typical) |
Specification
|
| Accuracy (linearity, repeatability and hysteresis) |
±0.25%F.S. (Typical) |
| Excitation |
1.5mA (Typical) |
| Compensated temp. |
0ºC-50ºC(Typical) |
| Operating temp. |
-20ºC-85ºC |
| Storage temp. |
-40ºC-125ºC |
| Zero temp. coefficient |
1.5%F.S.(500Pa, 2kPa, 5kPa, 10kPa) | 2%FS(250Pa, 20kPa, 35kPa, 70kPa, 100kPa) | 2.5%FS(1kPa, 7kPa) |
| Span temp. coefficient |
2%F.S. |
| Insulation resistance |
>100Mohm/250VDC |
| Input impedance |
2kΩ~5kΩ |
| Long term stability |
≤0.2%F.S.S/year |
| Vibration |
20g (20-5000HZ) |
| Oil filling |
Without oil filling |
| O-ring |
NBR, Fluorin |
| Housing and diaphragm |
Stainless steel 316L |
| Wire connection |
4 wire (typical) | 5 wire (available) 39×φ0.015, Silicon shielded, 200ºC bearing |
| Weight |
25g(approx) |
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
About Us:
){kind=link}
){kind=link}