PCM260 Submersible Level Transmitter
Features
Piezoresistive diffused silicon pressure sensor
Probe insertion measurement method, easy to install
For level measurement
Multiple protective structure design, high protection ability
LCD option
Variety of styles, suitable for various industrial applications
Anti-corrosion stainless steel material adopted, suitable for many occasions
Applications
Static pressure level
Liquid tanks
Sewage
Industrial water
Pools
Wells
Rivers
Seawater
Lakes
Telecommunications equipment,Diesel generator
Product overview
PCM260 Submersible Level Transmitter accurately measures static pressure of the liquid proportional to the level depth using high
performance piezoresistive diffused silicon pressure sensor as the measuring element. The result is converted to standard current
or voltage signal output through signal conditioning circuit, establishing the linear corresponding relation between the output signal
and liquid depth to complete the measurement of the liquid depth.
The product has advantages of high precision and small volume. Submerse it directly into liquid, the height between the end of the
transmitter to the liquid surface is measured easily. The product is applicable to the measurement and control of the liquid level in the
petroleum,chemical industry, power plant, urban water supply and hydrological exploration fields.
| Performance parameters |
| Pressure range |
0~1m…5m…10mH2O. Other pressure range can be customized. |
| Supply & output |
For 2088 housing without the display: code J1, you can choose: (18~36V, 24V typical) output 4~20mA |
| For cable outlet without 2088: code J3 / 2088 housing with the display: code J2, you can choose: (12~36V, 24V typical) output 4~20mA |
| Cable outlet without 2088 housing: code J3,you can choose digital circuit board, analogue circuit board, others can be customized. |
| Operating temp. |
-20ºC~85ºC |
| Medium temp. |
-10ºC~70ºC |
| Storage temp. |
-40ºC~125ºC |
| Zero temp. coefficient |
±1.5%FS (within compensated temp.) |
| Span temp. coefficient |
±1.5%FS (within compensated temp.) |
| Overpressure |
200%FS~300%FS |
| Mechanical vibration |
20g (20~5000HZ) |
| Shock |
100g (11ms) |
| Accuracy |
0.5%FS |
| Insulation |
200MΩ/250VDC |
| Response time |
≤1ms (Up to 90%FS analogue circuit board), ≤100ms (Up to 90%FS digital circuit board) |
| Long term stability |
±0.2%FS/year |
| Protection |
IP68 |
| Material |
Low copper aluminum alloy for junction box; stainless steel for level probe |
| Polyurethane wire for cable |
| Medium compatibility |
All kinds of media compatible with stainless steel 304 |
| Installation instructions (for reference only) |
1. Installation in still water (deep wells, pools, liquid tanks, etc.)
Installation tips:
1) When measuring the level of stationary fluid in an open container, place the level transmitter vertically into the bottom of the container and secure the cable connecting the transmitter to the junction box at the opening of the container.
2) When the medium viscosity is relatively large (such as sewage pool), casing or bracket can be installed to ensure that the transmitter can be put into the bottom of the container.
3) When doing an open-air installation, the terminal box of the transmitter should be placed in a ventilated and dry place to avoid direct exposure to light and rain, which may cause the shell temperature to be too high or water to get inside and damage the internal circuit board.
| Installation instructions (for reference only) (cont.) |
2. Installation in moving water (rivers, lakes, etc.)
Installation tips:
1) When measuring the water level in flowing water, when the medium fluctuates greatly, a steel pipe can be inserted in the water channel with an inner diameter of about 5cm. Make several holes of about Φ5 in diameter on the side of the immersed pipe opposite to the flow direction to allow water to enter the pipe and fix the cable and junction box at the outlet of the pipe.
2) When the medium of the water channel fluctuates greatly or the sediment is large, a damping device can be installed to filter the sediment, eliminate the adverse effects of dynamic pressure and wave and ensure the measurement accuracy.
| Pressure range selection |
| Pressure range |
Pressure reference |
Pressure range code |
Overpressure |
Burst pressure |
Remark |
| ≤1m H2O |
G |
10kG |
300%FS |
600%FS |
|
| <4 m H2O |
G |
35kG |
300%FS |
600%FS |
|
| <7 m H2O |
G |
70kG |
300%FS |
600%FS |
|
| ≤10 m H2O |
G |
100kG |
300%FS |
600%FS |
|
| Cable length selection |
| Pressure range code |
Mapping relation |
Code |
Definition |
| 10kG |
Cable length 1 meter |
L1 |
Please note us if you need longer cable.
|
| 35kG |
Cable length 2 meter |
L2 |
| 70kG |
Cable length 4 meter |
L4 |
| 100kG |
Cable length 7 meter |
L7 |
Example: PCM260-1.5miB1J3L1.5 D
Refer to product model PCM260, with pressure range 1.5m H2O, output signal 4~20mA (24VDC supply), electrical connection cable outlet, cable length 1.5m. If you do not choose "D",it is analogue circuit, please note.
Optional accessories
1. The part of cable exceeding the standard cable length
2. PCM260 anti-blocking protective cover (with filter)
Level Transmitter Slection
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
){kind=link}
){kind=link}