PC30 Pressure Sensor with Thread
Feature:
Piezoresistive silicon chip employed
Perfect long term stability
MEMS technology
Sensor diameter: 19mm
Product overview:
PC30 pressure sensor is a standard and popular sensor applied in air and liquid pressure measuring. A high sensitivity silicon pressure chip is employed in the sensor. The housing is filled with oil for pressure transmission. The most important specification for industry application is long term stability. The PC30 sensor is designed for industry application with perfect long term stability.
Diaphragm and pressure range:
The diaphragm diameter has tight relation with pressure measured. Low pressure requires large diameter and high pressure needs small diameter. This is caused by oil expansion during temperature changing. It creates internal pressure due to the resistance of the diaphragm. The smaller diaphragm will create large internal pressure, and it is difficult to make zero compensation.
| Pressure range |
| Pressure range |
1MPa, 1.6MPa, 2.5MPa, 4MPa, 6MPa, 10MPa, 16MPa, 25MPa, 40MPa, 60MPa, 100MPa (bar and psi unit available) |
| Pressure reference |
Absolute pressure | Sealed gauge pressure |
| Overpressure |
300%F.S.(≤70Kpa) | 200%F.S.(<25Mpa) | 150%F.S.(≥25Mpa) |
| Output signal |
| Zero output |
±2mV |
| Span output |
≥60mV |
| Specification |
| Accuracy (linearity, repeatability and hysteresis) |
±0.25%F.S. (Typical) |
| Excitation |
1.5mA (Typical) |
| Compensated temp. |
-10ºC -70ºC |
| Operating temp. |
-40ºC -125ºC |
| Storage temp. |
-40ºC -125ºC |
| Zero temp. coefficient |
0.02%F.S./ºC(≥100kPa) | 0.04%F.S./ºC(<100kPa) |
| Span temp. coefficient |
0.02%F.S./ºC(≥100kPa) | 0.04%F.S./ºC(<100kPa) |
| Insulation resistance |
>200Mohm/250VDC |
| Input impedance |
2kΩ-5kΩ |
| Long term stability |
≤0.2%F.S.S./year |
| Vibration |
20g (20-5000Hz) |
| Oil filling |
Silicon oil |
| O-ring |
NBR, Viton |
| Housing and diaphragm |
Stainless steel 316L |
| Wire connection |
4 wire (typical) | 5 wire (available) 39×φ0.015, Silicon shielded, 200ºC bearing |
| Pin connection |
Kovar pin (0.6um Gold platted) |
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
){kind=link}