PCM266 Smart Submersible Level Transmitter
Features
1.Piezoresistive diffused silicon pressure sensor
2.Probe insertion measurement method, easy to install
3.For level measurement
4.Multiple protective structure design, high protection ability
5.LCD option
6.Variety of styles, suitable for various industrial applications
7.Anti-corrosion stainless steel material adopted, suitable for many occasions
Applications
Static pressure level
Liquid tanks
Sewage
Industrial water
Pools
Wells
Rivers
Seawater
Lakes
Product overview
PCM266 Smart Submersible Level Transmitter accurately measures static pressure of the liquid proportional to the level depth using high performance
piezoresistive diffused silicon pressure sensor as the measuring element. The result is converted to standard current or voltage signal output through
signal conditioning circuit, establishing the linear corresponding relation between the output signal and liquid depth to complete the measurement of the
liquid depth. The product has advantages of high precision and small volume. Submerse it directly into liquid, the height between the end of the transmitter
to the liquid surface is measured easily. The product is applicable to the measurement and control of the liquid level in the petroleum, chemical industry, power
plant, urban water supply and hydrological exploration fields.
| Performance parameters |
| Pressure range |
0~1m…5m…20mH2O |
| Other pressure range can be customized |
| Supply & output |
12~36V supply:4~20mA+Hart, RS485-MODBUS output |
| Operating temp. |
-20ºC~85ºC |
| Medium temp. |
-10ºC~70ºC |
| Storage temp. |
-40ºC~125ºC |
| Zero temp. coefficient |
Range
>4mH2O |
±1.5%FS (-10~70ºC) |
Range
1~4mH2O |
±3%FS(0~60ºC) |
| Span temp. coefficient |
±1.5%FS (-10~70ºC) |
±3%FS(0~60ºC) |
| Overpressure |
200%FS~300%FS |
| Mechanical vibration |
20g, 25Hz~2kHz; IEC 60068-2-6 |
| Shock |
10g/11ms;IEC 60068-2-27 |
| Overall Accuracy |
≤±0.5%FS(Range>1mH20);≤±1%FS(Range:1mH20) |
| Insulation |
200MΩ/250VDC |
| Long term stability |
±0.2%FS/year |
| Protection |
IP68 |
| Material |
stainless steel for level probe |
| Polyurethane wire for cable |
| Medium compatibility |
All kinds of media compatible with stainless steel 304 |
| Electrical connection and wiring method |
| Product selection and installation instructions (for reference only) |
Installation tips:
1) When measuring the level of stationary fluid in an open container, place the level transmitter vertically into the bottom of the container and secure the cable
connecting the transmitter to the junction box at the opening of the container.
2) When the medium viscosity is relatively large (such as sewage pool),casing or bracket can be installed to ensure that the transmitter can be put into the bottom
of the container.
3) When doing an open-air installation, the terminal box of the transmitter should be placed in a ventilated and dry place to avoid direct exposure to light and rain,
which may cause the shell temperature to be too high or water to get inside and damage the internal circuit board.
2. Installation in moving water (rivers, lakes, etc.)
Installation tips:
1) When measuring the water level in flowing water, when the medium fluctuates greatly, a steel pipe can be inserted in the water channel with an inner
diameter
of about 5cm. Make several holes of about Φ5 in diameter on the side of the immersed pipe opposite to the flow direction to allow water to enter the pipe and fix
the cable and junction box at the outlet of the pipe.
2) When the medium of the water channel fluctuates greatly or the sediment is large, a damping device can be installed to filter the sediment, eliminate the
adverse effects of dynamic pressure and wave and ensure the measurement accuracy.
| Pressure range selection |
| Pressure range |
Pressure reference |
Pressure range code |
Overpressure |
Burst pressure |
Remark |
| ≤1m H2O |
G |
10kG |
300%FS |
600%FS |
|
| <4m H2O |
G |
35kG |
300%FS |
600%FS |
|
| <7m H2O |
G |
70kG |
300%FS |
600%FS |
|
| ≤12m H2O |
G |
100kG |
300%FS |
600%FS |
|
| ≤18m H2O |
G |
160kG |
300%FS |
600%FS |
|
| ≤20m H2O |
G |
250kG |
300%FS |
600%FS |
|
| Cable length selection |
| Pressure range code |
Standard cable length |
Code |
Definition |
| 10kG |
Cable length 1 meter |
L1 |
Please inform us if you need longer cable. |
| 35kG |
Cable length 1 meter |
L1 |
| 70kG |
Cable length 1 meter |
L1 |
| 100kG |
Cable length 1 meter |
L1 |
| 160kG |
Cable length 1 meter |
L1 |
| 250kG |
Cable length 1 meter |
L1 |
About Us:
Certifications:
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are manufacturer which focuses on pressure sensor for 33 years.
2. Q: What international certificates do you have?
A: ISO9001, CE, RoHS Certificated.
3. Q: What is your production capacity?
A: We produced 1500000 pieces pressure sensor in year 2017.
4. Q: What is the lead time of your product?
A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization.
Note: lead time may vary base on different products. Please contact us for detailed lead time.
5. Q: What is the warranty of your products?
A: Our warranty time is 18 months after shipment.
6. Q: Do you provide customized products?
A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.
Smart level transmitter
){kind=link}
){kind=link}