Wtsensor Pcl Electromagnetic Flow Meter

Product Description

PCL Electromagnetic Flow Meter
 

Features
1.Measurements are not affected by fluid density, viscosity, temperature, pressure and conductivity.
2.No obstacles in the measuring tube, no pressure loss, low requirements for straight pipe section.
3.In harsh environments, parameters can be set via infrared touch buttons without opening the cover of the converter (need to be     customized)
3.Flow meter with bidirectional measurement system, built-in three totalizers : positive total, reverse total and total difference.
4.It has various forms of output: current 4-20mA, pulse, frequency, RS485, HART.
5.The converter has self-diagnosis alarm output, no-load detection alarm output, flow upper and lower limit alarm, batch control     (need to be customized) and other alarm output functions.
6.Not only for general processes, but also for the measurement of ore pulp, mud, coal slurry, paper pulp and paste liquid.
7.High-pressure electromagnetic flow sensor with PFA lining technology, resistant to high pressure and negative pressure, especially suitable for petroleum, chemical and other industries.
8.Explosion-proof instruments can be used in corresponding explosion-proof places.
 

Applications

Widely used in steel, electricity, petroleum,chemical industry, coal, metallurgy papermaking, water supply and drainage, food, pharmaceutical industry.
 

Technical parameter

Main power	AC220V 50HZ/DC24V/DC12V/3.3V battery power supply
Power consumption	<15W (Supporting power consumption with sensors )
Display and buttons	Display in Chinese and English, can display instantaneous flow, accumulated flow and alarm display (excitation open circuit alarm, empty pipe alarm, flow over limit alarm). Four membrane touch switches for data setting
Counter	Forward total, reverse total
Output signal	Analog output	Two-way, fully isolated 0~10mA/4~20mA
		Load resistance: 0~1.5kΩ when 0~10mA; 0~750Ω when 4~20mA
	Frequency output	Forward and reverse flow output, the upper limit of output frequency can be set within 1~5000Hz. Open collector bidirectional output of transistor with photoelectric isolation. The external power supply is not greater than 35V, and the maximum current of the collector when it is turned on is 50mA
	Alarm output	Two-way open collector alarm output with photoelectric isolation transistor. The external power supply is not greater than 35V, and the maximum current of the collector when it is turned on is 250mA. Alarm status: fluid empty pipe, excitation disconnection, flow overrun
	Pulse output	Forward and reverse flow output, the output pulse upper limit can reach 5000CP/S. Pulse equivalent is 0.0001~1.0 m³/P. The pulse width is automatically set to 20ms or square wave. Open collector output of transistor with photoelectric isolation. The external power supply is not greater than 35V, and the maximum current of the collector when conducting is 50mA
Matching accuracy	±0.5% of indicated value, optional ±0.3% or ±0.2% of indicated value
Damping time constant	Continuous variable from 0~100s (90%) time grading optional
Communication	Optional RS232C or RS485 serial communication interface, HART communication protocol
Loss of power	The internal design of the instrument has a power-off clock, which can store 16 power-off records (10 years) (need to be customized)
Protection class	IP65
Explosion-proof mark	Ex d ia [ia Ga] q IIC T6 Gb

 

Caliber code table

Nominal diameter		Caliber code table
coding	caliber	coding	caliber	coding	caliber
030	3	125	125	901	900
060	6	150	150	102	1000
100	10	201	200	122	1200
150	15	251	250	142	1400
200	20	301	300	162	1600
250	25	351	350	182	1800
320	32	401	400	202	2000
400	40	451	450	222	2200
500	50	501	500	242	2400
650	65	601	600	262	2600
800	80	701	700	282	2800
101	100	801	800	302	3000
Nominal pressure		0.6 MPa		06
		1.0 MPa		10
		1.6 MPa		16
		Other pressure are complied as above		X
Lining material		Neoprene		1
		PTFE		2
		P46		3
		PFA		4
		Polyurethane rubber		5
		Silicone rubber		6
		Ceramics		7
Electrode material		Molybdenum-containing stainless steel		1
		Hastelloy B		2
		Hastelloy C		3
		Titanium		4
		Tantalum		5
		Platinum-iridium alloy		6
		Stainless steel coated with tungsten carbide		7
		Monel		8
Connection method		Flange connection		A
		Clamping type		B
		Clamp connection		C
		Thread connection		D

Body material	Standard	1
	304SS	2
	316L	3
Housing protection	IP 65	1
	IP 67	2
	IP 68 (Sensor IP68, Sensor IP65)	3
Explosion-proof mark	None	1
	Ex d ia [ia Ga] q IIC T6 Gb	2
Annex	None	0
	Matching flanges and fasteners	1
	Ground ring	2
	Ground electrode	3
Electrode form	Fixed	A
	Scraper	B
Structure	integrated	EH
	Split type	ER
Power	85-26 V AC 45-400Hz	1
	11-40 V DC	2
	3.6V battery power supply	3
	Solar power supply	4
Output type	Frequency,pulse/4~20mA, process control type	MG
	Frequency,pulse/4~20mA/RS485, Modbus protocol	MA
	Frequency,pulse/4~20mA/HART protocol	MB
	Frequency,pulse/4~20mA/RS485, HART protocol	MC
	Frequency,pulse/4~20mA/RS485, Profibus DP	MD
	Frequency,pulse/4~20mA, RS232	ME
	GPRS wireless communication	MF

About Us:





Certifications:

FAQ:
1.    Q: Are you manufacturer or trading company?
        A: We are manufacturer which focuses on pressure sensor for 33 years.
2.    Q: What international certificates do you have?
        A: ISO9001, CE, RoHS Certificated.
3.    Q: What is your production capacity?
        A: We produced 1500000 pieces pressure sensor in year 2017.
4.    Q: What is the lead time of your product?
        A: Stocks are available for some products. The typical lead time is 8~14 working days for product without customization. 
       Note: lead time may vary base on different products. Please contact us for detailed lead time. 
5.    Q: What is the warranty of your products?
       A: Our warranty time is 18 months after shipment.
6.    Q: Do you provide customized products?
       A: Yes, we can laser mark your logo, model and product information according to your requirement. We provide OEM and ODM service.